How To Install 500gb Hard Drive In Ps3

How to upgrade your PS3 difficult drive

In merely a few simple steps

Folio one of 2:

Introduction, what you'll need and steps 1 - 3

The PS3 may not be hot news in the game earth anymore, only we can guarantee you probably nonetheless oasis't played half of its best titles and we're still waiting on the PS4 to really testify us its best.

Still, almost models of Sony'southward final console don't have plenty hard drive space to store all that many game installs.

Something like the digital version of Uncharted 3 will consume up a huge chunk of an older PS3'southward HDD. It's very easy to upgrade the hard drive yourself though.

You can even use the default PS4 hard bulldoze if you lot're thinking about supercharging your new panel also. See how to do information technology in our PS4 HDD upgrade feature.

We're going to go through the process pace-past-pace. You simply need to set a one-half-60 minutes or so bated: it actually is that simple.

What you'll need:

1x PS3
1x Phillips screwdriver
1x 2.5-inch SATA HDD
1x USB stick (8GB preferred) or 1x FAT32 USB HDD
1x laptop or PC with internet
1x PS3 controller
1x miniUSB cablevision

Pace one: buying the HDD

What hard drive can you lot utilize in your PS3? You need to make sure it's a ii.5-inch serial ATA bulldoze of 9.5mm height or less.

In practical terms this means you can buy well-nigh two.v-inch 500GB or 1TB slimline hard drives without any major issues. 2TB hard drives are often a little too alpine, but then that chapters is arguably overkill for the anile PS3, peculiarly as the drive will usually cost y'all at least £85 (US$115, nearly AU$167).

If y'all opt for a 5400rpm drive, another spec yous should see listed aslope chapters, you'll become similar performance to the standard PS3 HDD. Upgrade to a 7200rpm difficult bulldoze or a more expensive 2.five-inch SSD, though, and you'll come across significantly improvements to load times. Y'all'll generally accept to pay around £15 more for a 7200rpm drive, though, and SSDs are a lot more expensive.

At the time of writing you lot're looking at £300 (United states of america$380, almost AU$589) or more for a 1TB SSD. The hard bulldoze we're using here is a bones 5400rpm 500GB model.

Step 2: backing-up

Unlike the PS4, the PS3 lets y'all back-upward all your saved games to a USB stick in one go, or fifty-fifty back-up almost all of your data (anything that DRM does non bar) before throwing out the old HDD.

You'll detect this option in the arrangement settings menu in settings. Alternatively, to just save all your save games go to the game header in the master menu, select salve data utility and then re-create multiple to save your games to USB. To practice all the saves at once, though, you demand a PS Plus subscription.

However, equally with a PS4, any PS Plus owners go gratuitous deject storage for save games anyway. Backing-up in more than one identify is e'er sensible, but not 100% necessary.

Step three: unleashing the hard drive

At that place are a few different variants of the PS3 out in that location. We're going to deal with how to take out the hard bulldoze of the PS3 Slim and more than recent PS3 Super Slim, which is the model you can even so buy new today.

Slim

To get the hard drive out of a Slim PS3, you need to turn it off, plow it over and pull off a fiddling plastic flap on its underside. It should be pretty clear, sitting towards the front of the lesser plate.

This flap volition reveal a piddling screw that keeps a piece of plastic in place just under the Blu-ray bulldoze. Remove the screw using a Phillips screwdriver. This piece of plastic hides the hard drive.

Now y'all need to slide the piece of plastic under the optical drive to the side just a little. Afterwards this you should be able remove information technology hands.

You should now see two little pieces of wire in the infinite where the flap was. Pull them lightly to remove the hard bulldoze. It should slide out without much endeavor.

The PS3's hard drive is fixed to a metal plate using four niggling screws on its underside. Yous'll need to remove all four to alter your old PS3 hard drive for your new one.

When y'all've swapped the drives, screw the screws dorsum in and re-seat the hard drive in the console. Make sure it'south fully inserted, though, or the bulldoze won't actually exist attached properly.

At present simply work your mode dorsum, putting back the plastic cover, putting the main screw back and re-seating the flap.

Andrew is a freelance journalist and has been writing and editing for some of the UK'due south top tech and lifestyle publications including TrustedReviews, Stuff, T3, TechRadar, Lifehacker and others.

Current page: Introduction, what you'll need and steps 1 - 3

Next Page Step three for the Super Slim PS3 and Stride 4